(RADIATOR) Re: cant connect Win XP to Orinoco AP-2000 via 802.1x (continue)
Mike McCauley
mikem at open.com.au
Fri Aug 22 17:56:13 CDT 2003
Hello Pavel,
On Sat, 23 Aug 2003 01:01 am, Pavel Paprok wrote:
> Mike McCauley wrote:
> >Hello Pavel,
> >
> >On Thu, 21 Aug 2003 10:40 pm, Pavel Paprok wrote:
> >>Mike McCauley wrote:
> >>>On Wed, 20 Aug 2003 08:42 pm, Pavel Paprok wrote:
> >>>>Hallo,
> >>>>
> >>>>I am trying to get work wifi access point Orinoco/Proxim AP-2000 with
> >>>>802.1x EAP/PEAP user auth by Radiator:
> >>>>- Radiator 3.6 eval version RPM on RedHat 9, configured for EAP/PEAP
> >>>>with demo certificates.
> >>>>- Orinoco/Proxim AP-2000 (latest firmware 2.1.3)
> >>>>- Test client is notebook Dell with Win XP (all patches applied),
> >>>>wireless card Orinoco Silver
> >>>> and/or builtin Intel Pro/WirelessLAN 2100 3A
> >>>>
> >>>>After all known install and config issues I meet (described in FAQ,
> >>>>archive and UtahGeeks) I moved to status where
> >>>>user is authenticated OK and radius send "Access-Accept". But its last
> >>>>info from radius log, no real connection follows, no accounting on log.
> >>>>Especially basic UtahGeeks config of Access point is pretty closed to
> >>>>our config, but unfortunatelly there are not published Radiator
> >>>>configuration so here maybe I have a problem. Or problem is in using
> >>>>different wifi client? Please help me somebody where is a problem?
> >>>
> >>>That sounds a lot like the client is not configured to expect a dynamic
> >>>WEP key, but your Radiator is configured to send themto the AP.
> >>>
> >>>Check the 'WEP key will be provided for me' option in your client
> >>>configuration.
> >>
> >>of course, as I have written below in Windows XP client config:
> >>
> >>"- Key is provided for me automatically ON"
> >>yesterday i also turn on eap tracing in WinXP, see log below, interesting
> >>is last line:
> >>
> >>"We got a EAP_failure after we got a PEAP_SUCCESS. Failing auth."
> >>
> >>...i dont know what it means.
> >
> >That is very curious, since the last thing sent by Radiator is clearly an
> > EAP Success.
> >Perhaps the EAP Failure is being sent by the AP?
> >
> >I wonder if your AP needs some configuration so that it will support
> > dynamic WEP?
> >
> >Cheers.
>
> I just try to use AP Signamax 22Mbps in 802.1x with same radiator and
> windows xp client configuration
> and client connected ok! So there should be no general problem with
> client and radius configuration,
> problem is likely in Avaya or its configuration. Or in EAP compatibility
> of Avaya?
Sounds like the problem is there.
We found when we tested the Orinoco AP-2000 here that you had to have the
_latest_ firmware installed else it would not work properly. see the Radiator
FAQ for more details. http://www.open.com.au/radiator/faq.html
>
> I noted that I must set a "IgnoreAcctSignature" option to "yes" for
> Avaya or I get "Bad EAP Message-Authenticator" warnings in log and auth
> failed. Signamax works ok both with or without this option ....maybe
> there is a start of problems?
Sounds like there is a shared secret problem between Radiator and the Avaya?
> Are there some AddToReply which I would try to add to reply for Avaya?
> Have Avaya AP-2000 working with 802.1x somebody to help me with
> configuratio? Article in FAQ
> about it does not help me, I dont know where is mistake so exact AP
> configure dump of real working device welcomed.
Cheers.
>
> Pavel
>
> >>Pavel
> >>
> >>>Cheers.
> >>>
> >>>>My configuration:
> >>>>
> >>>>------ users ------
> >>>>wifitest User-Password=wifi
> >>>> Session-Timeout=60
> >>>>
> >>>>
> >>>>------ radius.cfg ------
> >>>>AuthPort 1812
> >>>>AcctPort 1813
> >>>>
> >>>>LogStdout
> >>>>LogDir /var/log/radius
> >>>>DbDir /etc/radiator
> >>>>
> >>>>Trace 5
> >>>>
> >>>><Client XXX.XXX.XXX.XXX>
> >>>> Secret XXXXX
> >>>> Identifier wifi-testnet
> >>>> IgnoreAcctSignature yes
> >>>></Client>
> >>>># now core config from eap_peap.cfg example:
> >>>>
> >>>><Handler TunnelledByPEAP=1>
> >>>> AcctLogFileName %L/detail
> >>>> <AuthBy FILE>
> >>>> Filename %D/users
> >>>> EAPType MSCHAP-V2
> >>>> </AuthBy>
> >>>></Handler>
> >>>><Handler>
> >>>> <AuthBy FILE>
> >>>> Filename %D/users
> >>>> EAPType PEAP
> >>>> EAPTLS_CAFile %D/certificates/demoCA/cacert.pem
> >>>>
> >>>> EAPTLS_CertificateFile %D/certificates/cert-srv.pem
> >>>> EAPTLS_CertificateType PEM
> >>>>
> >>>> EAPTLS_PrivateKeyFile %D/certificates/cert-srv.pem
> >>>> EAPTLS_PrivateKeyPassword whatever
> >>>>
> >>>> EAPTLS_MaxFragmentSize 1024
> >>>>
> >>>> AutoMPPEKeys
> >>>> # i did try also
> >>>> #AddToReply MS-MPPE-Encryption-Policy =
> >>>>Encryption-Allowed,\
> >>>> # MS-MPPE-Encryption-Types =
> >>>> Encryption-Any SSLeayTrace 4
> >>>>
> >>>> </AuthBy>
> >>>></Handler>
> >>>>
> >>>>
> >>>>------ WinXP client configuration ------
> >>>>
> >>>>- Data encryption (WEP enabled) ON
> >>>>- Network Authentication (Shared mode) OFF
> >>>>- Key is provided for me automatically ON
> >>>>- Adhoc network OFF
> >>>>- Enable 802.1x auth ON
> >>>>- EAP type: PEAP
> >>>>-Authenticate as computer OFF
> >>>>- Authenticate as guest OFF
> >>>>- Validate server certificate OFF
> >>>>- Authentication method: EAP-MSCHAP v2 (automatically use Windows logon
> >>>>name OFF)
> >>>>- Enable fast reconnect OFF
> >>>>
> >>>>----- something from Orinoco-2000 config -----
> >>>>
> >>>>Operational Mode
> >>>>Wireless A: 802.11bg
> >>>> physical iface 802.11g OFDM / DSSS 2.4 GHz, enable auto channel
> >>>>select ON, transmit rate: auto fallback,
> >>>> dtim period: 1 rts/cts medium reservation: 2347, enable closed
> >>>>system: OFF
> >>>>
> >>>>
> >>>>Wireless B: 802.11b only
> >>>> physical iface 802.11b DSSS 2.4 GHz enable auto channel select ON,
> >>>>mcast rate: 2mbit,
> >>>> dtim period: 1 rts/cts medium reservation: 2347, dist AP: large,
> >>>>enable closed system: OFF,
> >>>> enable load balancing: ON, enable medium density distribution: ON
> >>>>
> >>>> MAC access control: OFF
> >>>>
> >>>> Authentication:
> >>>> wireless slot A: mode 802.1x, rekeying interval: 900, encr key
> >>>>lenght: 64bits
> >>>> wireless slot B: mode 802.1x, rekeying interval: 900, encr key
> >>>>lenght: 64bits
> >>>>
> >>>> Radius auth:
> >>>> enable radius mac access control: OFF, enable primary radius: ON,
> >>>>enable backup radius: OFF,
> >>>> auth lifetime: 900sec, primary radius server ip, port and shared
> >>>>secret set properly, resp time: 3sec,
> >>>> max retr: 3
> >>>>
> >>>> Radius acct:
> >>>> enable radius accounting: ON, enable primary radius: ON, enable
> >>>>backup radius: OFF,
> >>>> primary radius server ip, port and shared secret set properly,
> >>>>resp time: 3sec,
> >>>> max retr: 3
> >>>> DHCP server:
> >>>> enabled
> >>>>
> >>>>
> >>>>------ radius log recorded ------ (tainted, only last lines, real ip
> >>>> of radiator and AP replaced, there are no ERROR lines in log...)
> >>>>
> >>>>
> >>>>Packet length = 163
> >>>>01 0a 00 a3 35 01 00 00 d3 70 00 00 ea 7f 00 00
> >>>>fc 20 00 00 01 0a 77 69 66 69 74 65 73 74 04 06
> >>>>d5 c2 c2 5e 1e 13 30 30 2d 32 30 2d 61 36 2d 34
> >>>>38 2d 65 37 2d 33 66 1f 13 30 30 2d 30 34 2d 32
> >>>>33 2d 34 38 2d 66 31 2d 66 33 20 13 4f 52 69 4e
> >>>>4f 43 4f 2d 41 50 2d 32 30 30 30 41 45 0c 06 00
> >>>>00 05 78 3d 06 00 00 00 13 4f 28 02 0b 00 26 19
> >>>>00 17 03 01 00 1b 21 3a 80 0e 47 22 d7 62 48 7e
> >>>>9e 6c 5f 02 a9 68 ba 5f 5d 43 03 a4 20 bb 7d 3c
> >>>>04 50 12 4d 14 ad 48 15 4e 0b 5a da b5 23 9f ab
> >>>>a0 b4 b8
> >>>>Code: Access-Request
> >>>>Identifier: 10
> >>>>Authentic: 5<1><0><0><211>p<0><0><234><127><0><0><252> <0><0>
> >>>>Attributes:
> >>>> User-Name = "wifitest"
> >>>> NAS-IP-Address = ORI.NO.CO.IP
> >>>> Called-Station-Id = "00-20-a6-48-e7-3f"
> >>>> Calling-Station-Id = "00-04-23-48-f1-f3"
> >>>> NAS-Identifier = "ORiNOCO-AP-2000AE"
> >>>> Framed-MTU = 1400
> >>>> NAS-Port-Type = Wireless-IEEE-802-11
> >>>> EAP-Message =
> >>>><2><11><0>&<25><0><23><3><1><0><27>!:<128><14>G"<215>bH~<158>l_<2><169>
> >>>>h< 18 6>_]C<3><164> <187>}<<4>
> >>>> Message-Authenticator =
> >>>>M<20><173>H<21>N<11>Z<218><181>#<159><171><160><180><184>
> >>>>
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Handling request with Handler ''
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Deleting session for wifitest,
> >>>>ORI.NO.CO.IP ,
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Handling with Radius::AuthFILE:
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Handling with EAP: code 2, 11, 38
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Response type 25
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Access accepted for wifitest
> >>>>Tue Aug 19 14:20:36 2003: DEBUG: Packet dump:
> >>>>*** Sending to ORI.NO.CO.IP port 6001 ....
> >>>>
> >>>>Packet length = 160
> >>>>02 0a 00 a0 16 83 b2 81 33 aa 76 f3 c4 8c bd f6
> >>>>80 76 b9 ea 1a 3a 00 00 01 37 10 34 ed 16 5d 7f
> >>>>0e 74 a1 73 03 45 9c 75 15 67 22 90 c7 3d b5 b1
> >>>>71 60 1d ba be d4 29 00 42 83 18 62 b0 2f 61 c6
> >>>>ca db b1 02 2d f4 76 4e 67 65 2c 98 f2 ea 1a 3a
> >>>>00 00 01 37 11 34 87 c2 87 6c 05 9a 2e c2 87 c5
> >>>>39 89 e5 45 73 57 63 e9 02 be 82 f2 21 84 ea 0d
> >>>>f9 8e cc fd 4d 72 8e d9 4b 72 37 5e 55 e9 f7 65
> >>>>87 79 8d 45 2d 79 46 99 4f 06 03 0b 00 04 50 12
> >>>>9d 85 0f 55 3f ea 50 c9 85 db 50 75 01 92 67 ec
> >>>>Code: Access-Accept
> >>>>Identifier: 10
> >>>>Authentic: 5<1><0><0><211>p<0><0><234><127><0><0><252> <0><0>
> >>>>Attributes:
> >>>> MS-MPPE-Send-Key =
> >>>>"<237><22>]<127><14>t<161>s<3>E<156>u<21>g"<144><199>=<181><177>q`<29><
> >>>>18 6>
> >>>><190><212>)<0>B<131><24>b<176>/a<198><202><219><177><2>-<244>vNge,<152>
> >>>>< 242> <234>"
> >>>>
> >>>> MS-MPPE-Recv-Key =
> >>>>"<135><194><135>l<5><154>.<194><135><197>9<137><229>EsWc<233><2><190><1
> >>>>30
> >>>>
> >>>>><
> >>>>
> >>>>242>!<132><234><13><249><142><204><253>Mr<142><217>Kr7^U<233><247>e<135
> >>>>> y<14 1>E-yF<153>"
> >>>>
> >>>> EAP-Message = <3><11><0><4>
> >>>> Message-Authenticator =
> >>>><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
> >>
> >>log from windows xp 802.1x client:
> >>
> >>[5584] 12:58:01:192: PeapReadConnectionData
> >>[5584] 12:58:01:192: PeapReadUserData
> >>[5584] 12:58:01:192: RasEapGetInfo
> >>[5584] 12:58:01:192: PeapReDoUserData
> >>[5584] 12:58:30:234: PeapReadConnectionData
> >>[5584] 12:58:30:234: PeapReadUserData
> >>[5584] 12:58:30:244: RasEapGetInfo
> >>[5584] 12:58:30:244: PeapReDoUserData
> >>[5584] 12:58:43:203: EapPeapBegin
> >>[5584] 12:58:43:203: PeapReadConnectionData
> >>[5584] 12:58:43:203: PeapReadUserData
> >>[5584] 12:58:43:203:
> >>[5584] 12:58:43:203: EapTlsBegin(wifitest)
> >>[5584] 12:58:43:203: State change to Initial
> >>[5584] 12:58:43:203: EapTlsBegin: Detected 8021X authentication
> >>[5584] 12:58:43:203: EapTlsBegin: Detected PEAP authentication
> >>[5584] 12:58:43:203: MaxTLSMessageLength is now 16384
> >>[5584] 12:58:43:203: EapPeapBegin done
> >>[5584] 12:58:43:203: EapPeapMakeMessage
> >>[5584] 12:58:43:203: EapPeapCMakeMessage
> >>[5584] 12:58:43:203: PEAP:PEAP_STATE_INITIAL
> >>[5584] 12:58:43:203: EapTlsCMakeMessage
> >>[5584] 12:58:43:203: EapTlsReset
> >>[5584] 12:58:43:203: State change to Initial
> >>[5584] 12:58:43:203: GetCredentials
> >>[5584] 12:58:43:203: Flag is Client and Store is Current User
> >>[5584] 12:58:43:203: GetCachedCredentials
> >>[5584] 12:58:43:203: PEAP GetCachedCredentials: Using cached credentials.
> >>[5584] 12:58:43:203: MakeReplyMessage
> >>[5584] 12:58:43:203: SecurityContextFunction
> >>[5584] 12:58:43:243: InitializeSecurityContext returned 0x90312
> >>[5584] 12:58:43:243: State change to SentHello
> >>[5584] 12:58:43:243: BuildPacket
> >>[5584] 12:58:43:243: << Sending Response (Code: 2) packet: Id: 4,
> >>Length: 80, Type: 13, TLS blob length: 70. Flags: L
> >>[5584] 12:58:43:243: EapPeapCMakeMessage done
> >>[5584] 12:58:43:243: EapPeapMakeMessage done
> >>[5584] 12:58:43:263: EapPeapMakeMessage
> >>[5584] 12:58:43:263: EapPeapCMakeMessage
> >>[5584] 12:58:43:263: PEAP:PEAP_STATE_TLS_INPROGRESS
> >>[5584] 12:58:43:263: EapTlsCMakeMessage
> >>[5584] 12:58:43:263: MakeReplyMessage
> >>[5584] 12:58:43:263: Reallocating input TLS blob buffer
> >>[5584] 12:58:43:263: BuildPacket
> >>[5584] 12:58:43:263: << Sending Response (Code: 2) packet: Id: 5,
> >>Length: 6, Type: 13, TLS blob length: 0. Flags:
> >>[5584] 12:58:43:263: EapPeapCMakeMessage done
> >>[5584] 12:58:43:263: EapPeapMakeMessage done
> >>[5584] 12:58:43:323: EapPeapMakeMessage
> >>[5584] 12:58:43:323: EapPeapCMakeMessage
> >>[5584] 12:58:43:323: PEAP:PEAP_STATE_TLS_INPROGRESS
> >>[5584] 12:58:43:323: EapTlsCMakeMessage
> >>[5584] 12:58:43:323: MakeReplyMessage
> >>[5584] 12:58:43:323: BuildPacket
> >>[5584] 12:58:43:323: << Sending Response (Code: 2) packet: Id: 6,
> >>Length: 6, Type: 13, TLS blob length: 0. Flags:
> >>[5584] 12:58:43:323: EapPeapCMakeMessage done
> >>[5584] 12:58:43:323: EapPeapMakeMessage done
> >>[5584] 12:58:43:333: EapPeapMakeMessage
> >>[5584] 12:58:43:333: EapPeapCMakeMessage
> >>[5584] 12:58:43:333: PEAP:PEAP_STATE_TLS_INPROGRESS
> >>[5584] 12:58:43:333: EapTlsCMakeMessage
> >>[5584] 12:58:43:333: MakeReplyMessage
> >>[5584] 12:58:43:333: SecurityContextFunction
> >>[5584] 12:58:43:393: InitializeSecurityContext returned 0x90312
> >>[5584] 12:58:43:393: State change to SentFinished
> >>[5584] 12:58:43:393: BuildPacket
> >>[5584] 12:58:43:393: << Sending Response (Code: 2) packet: Id: 7,
> >>Length: 199, Type: 13, TLS blob length: 189. Flags: L
> >>[5584] 12:58:43:393: EapPeapCMakeMessage done
> >>[5584] 12:58:43:393: EapPeapMakeMessage done
> >>[5584] 12:58:43:413: EapPeapMakeMessage
> >>[5584] 12:58:43:413: EapPeapCMakeMessage
> >>[5584] 12:58:43:413: PEAP:PEAP_STATE_TLS_INPROGRESS
> >>[5584] 12:58:43:413: EapTlsCMakeMessage
> >>[5584] 12:58:43:413: MakeReplyMessage
> >>[5584] 12:58:43:413: SecurityContextFunction
> >>[5584] 12:58:43:413: InitializeSecurityContext returned 0x0
> >>[5584] 12:58:43:413: AuthenticateServer
> >>[5584] 12:58:43:413: CreateMPPEKeyAttributes
> >>[5584] 12:58:43:413: State change to RecdFinished
> >>[5584] 12:58:43:413: BuildPacket
> >>[5584] 12:58:43:413: << Sending Response (Code: 2) packet: Id: 8,
> >>Length: 6, Type: 13, TLS blob length: 0. Flags:
> >>[5584] 12:58:43:413: EapPeapCMakeMessage done
> >>[5584] 12:58:43:413: EapPeapMakeMessage done
> >>[5584] 12:58:43:423: EapPeapMakeMessage
> >>[5584] 12:58:43:423: EapPeapCMakeMessage
> >>[5584] 12:58:43:423: PEAP:PEAP_STATE_TLS_INPROGRESS
> >>[5584] 12:58:43:423: EapTlsCMakeMessage
> >>[5584] 12:58:43:423: Negotiation successful
> >>[5584] 12:58:43:423: PeapGetTunnelProperties
> >>[5584] 12:58:43:423: Successfully negotiated TLS with following
> >>parametersdwProtocol = 0x80, Cipher= 0x6801,
> >>CipherStrength=0x80,Hash=0x8003 [5584] 12:58:43:423:
> >>PeapGetTunnelProperties done
> >>[5584] 12:58:43:423: PeapClientDecryptTunnelData
> >>[5584] 12:58:43:423: IsDuplicatePacket
> >>[5584] 12:58:43:423: PeapDecryptTunnelData dwSizeofData = 0x16, pData =
> >>0x4261ff4
> >>[5584] 12:58:43:423: PeapDecryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:423: PeapEncryptTunnelData
> >>[5584] 12:58:43:423: PeapEncryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:423: EapPeapCMakeMessage done
> >>[5584] 12:58:43:423: EapPeapMakeMessage done
> >>[5584] 12:58:43:483: EapPeapMakeMessage
> >>[5584] 12:58:43:483: EapPeapCMakeMessage
> >>[5584] 12:58:43:483: PEAP:PEAP_STATE_IDENTITY_RESPONSE_SENT
> >>[5584] 12:58:43:483: PeapClientDecryptTunnelData
> >>[5584] 12:58:43:483: IsDuplicatePacket
> >>[5584] 12:58:43:483: PeapDecryptTunnelData dwSizeofData = 0x38, pData =
> >>0x4261ff4
> >>[5584] 12:58:43:483: PeapDecryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:483: PeapEncryptTunnelData
> >>[5584] 12:58:43:483: PeapEncryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:483: EapPeapCMakeMessage done
> >>[5584] 12:58:43:483: EapPeapMakeMessage done
> >>[5584] 12:58:43:503: EapPeapMakeMessage
> >>[5584] 12:58:43:503: EapPeapCMakeMessage
> >>[5584] 12:58:43:503: PEAP:PEAP_STATE_EAP_TYPE_INPROGRESS
> >>[5584] 12:58:43:503: PeapClientDecryptTunnelData
> >>[5584] 12:58:43:503: IsDuplicatePacket
> >>[5584] 12:58:43:503: PeapDecryptTunnelData dwSizeofData = 0x4e, pData =
> >>0x4261ff4
> >>[5584] 12:58:43:503: PeapDecryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:503: PeapEncryptTunnelData
> >>[5584] 12:58:43:503: PeapEncryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:503: EapPeapCMakeMessage done
> >>[5584] 12:58:43:503: EapPeapMakeMessage done
> >>[5584] 12:58:43:513: EapPeapMakeMessage
> >>[5584] 12:58:43:513: EapPeapCMakeMessage
> >>[5584] 12:58:43:513: PEAP:PEAP_STATE_EAP_TYPE_INPROGRESS
> >>[5584] 12:58:43:513: PeapClientDecryptTunnelData
> >>[5584] 12:58:43:513: IsDuplicatePacket
> >>[5584] 12:58:43:513: PeapDecryptTunnelData dwSizeofData = 0x20, pData =
> >>0x4261ff4
> >>[5584] 12:58:43:513: PeapDecryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:513: GetPEAPTLVStatusMessageValue
> >>[5584] 12:58:43:523: CreatePEAPTLVStatusMessage
> >>[5584] 12:58:43:523: PeapEncryptTunnelData
> >>[5584] 12:58:43:523: PeapEncryptTunnelData completed with status 0x0
> >>[5584] 12:58:43:523: EapPeapCMakeMessage done
> >>[5584] 12:58:43:523: EapPeapMakeMessage done
> >>[5584] 12:58:43:533: EapPeapMakeMessage
> >>[5584] 12:58:43:533: EapPeapCMakeMessage
> >>[5584] 12:58:43:533: PEAP:PEAP_STATE_PEAP_SUCCESS_SEND
> >>[5584] 12:58:43:533: We got a EAP_failure after we got a PEAP_SUCCESS.
> >>Failing auth.
> >>[5584] 12:58:43:533: EapPeapCMakeMessage done
> >>[5584] 12:58:43:533: EapPeapMakeMessage done
> >>[5584] 12:59:43:349: EapPeapEnd
> >>[5584] 12:59
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
--
Mike McCauley mikem at open.com.au
Open System Consultants Pty. Ltd Unix, Perl, Motif, C++, WWW
24 Bateman St Hampton, VIC 3188 Australia http://www.open.com.au
Phone +61 3 9598-0985 Fax +61 3 9598-0955
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory, EAP, TLS,
TTLS, PEAP etc on Unix, Windows, MacOS etc.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list