(RADIATOR) Basic users file & MSCHAP question

[Luis Marquez]

Hello Hugh,

Thanks for the info, I appreciate it. I created my users file with the
examples you gave. I  also added:

# Generate MPPE keys to encrypt pptp vpns
                AutoMPPEKeys Yes

to my default realm in my radius.cfg file and MSCHAP PPTP connections work
now.

thanks again.

Luis

----- Original Message -----
From: "Hugh Irvine" <hugh at open.com.au>
To: "Luis Marquez" <luism at digitalpath.net>
Cc: <radiator at open.com.au>
Sent: Wednesday, October 16, 2002 11:15 PM
Subject: Re: (RADIATOR) Basic users file & MSCHAP question


>
> Hello Luis -
>
> Thanks for sending the files.
>
> As far as I can see, Radiator is operating correctly, with the user
> being ACCEPT'ed.
>
> However, you are not returning any reply attributes, so the session is
> not being created.
>
> Your users file should only contain your own users and nothing else
> (ie. don't use the example file).
>
> Depending on what else you are doing, you may need other reply
> attributes, but this should get you started:
>
> # users file
>
> mschaptest Password=MyPw
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Netmask = 255.255.255.255
>
> Check with your vendor or the Cisco web site to verify what radius
> attributes are required to operate this equipment.
>
> regards
>
> Hugh
>
>
> On Thursday, October 17, 2002, at 05:36 AM, Luis Marquez wrote:
>
> > Hello,
> >
> > I recently got an eval version of radiator to test on our Linux server
> > and I
> > could use a bit of advice on creating a users file. The example users
> > file
> > seems like it might be a bit much for our needs. Also, I am trying to
> > get
> > mschap support working with our Cisco VPN 3000 concentrator.  I'll
> > give you
> > some information on our setup.
> >
> >  We have a Cisco VPN 3000 vpn concentrator that authenticates via
> > radius.
> > Customers that connect with the cisco vpn client software can connect
> > ok,
> > but when a customer tries to connect using a PPTP vpn connection using
> > MSCHAP, their computer gives an error about the server not using the
> > correct
> > type of encryption. I have included the users file and radius.cfg.
> >


===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.