(RADIATOR) radiator and ipass

[Ayotunde Itayemi]

Hi,

You didn't say anything about the other parts of your config - special
entries in
your client clauses, special client clause for ipass, username character set
definition,
format you receive ipass client username requests etc.

Regards,
Tunde I.

----- Original Message -----
From: "Mike Blancas" <mblancas at mozcom.com>
To: "Ayotunde Itayemi" <aitayemi at metrong.com>
Cc: "Hugh at Open.Com.Au" <hugh at open.com.au>; <radiator at open.com.au>
Sent: Tuesday, October 01, 2002 2:29 AM
Subject: Re: (RADIATOR) radiator and ipass


> Our setup is to proxy all iPass request to our iPass netserver using the
> AuthBy RADIUS and Realm DEFAULT. My local accounts are handled by
> different Realm and AuthBy clauses. This setup has been working for more
> than 1 yr without any problems. In the bottom of my radius.cfg, I have the
> following lines:
>
> <Realm DEFAULT>
>         <AuthBy RADIUS>
>                 Host ipass.netserver.ip
>                 Secret xxxxxxxx
>                 AuthPort 11812
>                 AcctPort 11813
>         </AuthBy>
> </Realm>
>
> Mike Blancas <mblancas at mozcom.com>
> Mosaic Communications, Inc.
>
> On Mon, 30 Sep 2002, Ayotunde Itayemi wrote:
>
> > Hi All,
> >
> > Is there anybody on the list running ipass netserver and radiator?
> > I am having problems with my config. I have installed both software but
in order to get it to
> > work properly, ipass specifies that the following lines should be added
to all client clauses
> > in the radiator config file:
> >
> >       RewriteUsername s/^IPASS\/([^@]+)\@([^@]+)$/IPASS\/$1#$2\@myipass/
> >
> >
> > After having added the line above, I (assume) then need to add the
character / to the  UsernameCharset
> > set in radiator so as to allow names of the form IPASS/username ?
> >
> > Default of ( a-zA-Z0-9\._ at - ). I have tried (  UsernameCharset
a-zA-Z0-9\._ at -/)  and (  UsernameCharset a-zA-Z0-9\._ at -\/ )
> >
> > But I noticed that when I do so, a request with the name of the form
IPASS/username kills radiator.
> > It just stops and even there is nothing in the log with a trace 4
option.
> >
> > Please I would liek someone to provide me with a working config and if
possible a brief explanation
> > of any area that is not too clear or standard.
> >
> > Regards,
> > Tunde I.
> >
> >
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
>

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.