(RADIATOR) EAP-MD5 with XP

[Mike McCauley]

Hello Tom,

that all looks OK.
What is the upstream NAS?
What type of client is it?
Are you able to turn on debug in the NAS and observe what it thinks about the 
problem?

Cheers.


On Tue, 28 May 2002 22:59, Tom Rixom wrote:
> Hello,
>
> I attached the output (tom) and the sample users file (users) and config
> file (ut.cfg).
>
> I have changed nothing in the user file. (probably the problem ;))
>
> I addedd the EAP type to the config file.
>
> Tom
>
> -----Original Message-----
> From: Mike McCauley [mailto:mikem at open.com.au]
> Sent: Tuesday, May 28, 2002 2:34 PM
> To: hugh at open.com.au; Tom Rixom; radiator at open.com.au
> Subject: Re: (RADIATOR) EAP-MD5 with XP
>
> On Tue, 28 May 2002 22:02, Hugh Irvine wrote:
> > Hello Tom -
> >
> > I have copied this mail to Mike, as he has been doing a lot of work in
> > this area recently.
> >
> > In the meantime I suggest you download Radiator 3.1, plus the patches
> > which have additional EAP support in them.
> >
> > Mike will undoubtedly have additional comments.
>
> Yes....
> EAP MD5-Challenge requires that the user database have a User-Password
> check item containing the plaintext password. It must be User-Password and
> not Password (ie the spelling of the check item is important)
>
> There were somwe patches and fixes to EAP in 3.0 and 3.1, plus subsequent
> patches. As Hugh says it would probably be best to upgrade. I cant think of
> any issues that would stop 2.19 working with EAP M5, but I may be wrong.
>
> Further than that , we would need to see a Trace level 4 log file.
>
> Cheers.
>
> > regards
> >
> > Hugh
> >
> > On Tue, 28 May 2002 20:52, Tom Rixom wrote:
> > > Hello,
> > >
> > > I am trying to get Radiator to run using EAP-MD5 with a Windows XP
> > > client and a Cisco 350 WLAN AP.
> > >
> > > I am not yet familliar with Radiator yet, but I would like to get
> > > EAP-MD5 up and running as fast as possible.
> > >
> > > I used the test programs and it checked out fine.
> > >
> > > To test EAP-MD5 I:
> > >
> > > - used the simple.cfg file with an extra addition: EAPType
> > > MD5-Challenge. - used the sample user file as the user database.
> > >
> > > I tried to log on using: username fred, password fred.
> > >
> > > When I connected using the Windows XP client Radiator received the
> > > access-request packet, looked in the user db and then sent an
> > > access-challenge. Windows XP however then responded with an
> > > access-request packet again... instead of the access-response.
> > >
> > > Is their something I need to change in the sample user database file to
> > > allow it to work with EAP?
> > >
> > > Best Regards,
> > >
> > > Tom Rixom
> > >
> > > Alfa & Ariss
> > > Network Security Solutions
> > > www.alfa-ariss.com
> > >
> > > Lansinkesweg 4-226
> > > 7553 AE Hengelo Ov
> > > PO Box 960-35
> > > 7550 AZ Hengelo Ov
> > > The Netherlands
> > >
> > > Tel: +31 (0)74 2555 636
> > > Fax: +31 (0)74 2555 638
> > > E-mail: tom.rixom at alfa-ariss.com
> > >
> > > ===
> > > Archive at http://www.open.com.au/archives/radiator/
> > > Announcements on radiator-announce at open.com.au
> > > To unsubscribe, email 'majordomo at open.com.au' with
> > > 'unsubscribe radiator' in the body of the message.

-- 
Mike McCauley                               mikem at open.com.au
Open System Consultants Pty. Ltd            Unix, Perl, Motif, C++, WWW
24 Bateman St Hampton, VIC 3188 Australia   http://www.open.com.au
Phone +61 3 9598-0985                       Fax   +61 3 9598-0955

Radiator: the most portable, flexible and configurable RADIUS server 
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald, 
Platypus, Freeside, TACACS+, PAM, external, Active Directory etc etc 
on Unix, Win95/8, 2000, NT, MacOS 9, MacOS X etc etc
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.