(RADIATOR) Strange problem ...
Muhammad Mushtaque
mushtaque at eworld.net.pk
Thu Jan 31 10:10:02 CST 2002
Hi Hugh,
You were right about the error. I debug the Nas and its problem with
the maximum limit of "timeout absolute" on each Async interface on
Which our Dialup users are getting connected i-e (0-35790 mins)
But we have to go beyond this limit through session timeout.
Is there any way to write a hook which compares the value read from the
database and always sends the max value of "session-timeout" attribute
to the NAS until the value read from database drops below the max. In
this case, it will send the actual value read from the database.
or is there any other way to do acheive this task ??
thanks in advance,
regards,
Muhammad Mushtaque
Network Operations
eWorld(Pvt)Ltd.
506, Progressive Plaza,
Beaumont Road Civil Lines,
Karachi.
UAN:92-21-111246246
________
This email and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to which they
are addressed. This communication represents the originator's personal
views and opinions, which do not necessarily reflect those of eWorld
(Pvt) Ltd. If you are not the original / intended recipient or the
person responsible for delivering the email to the intended recipient,
be advised that you have received this email in error, and that any
use, dissemination, forwarding, printing, or copying of this email is
strictly prohibited. If you have received this email in error, we
regret the inconvenience and request you to please immediately notify
at info at eworld.net.pk
----- Original Message -----
From: Hugh Irvine <hugh at open.com.au>
Date: Thursday, January 17, 2002 5:46 am
Subject: Re: (RADIATOR) Strange problem ...
>
> Hello Mushtaque -
>
> Thanks for sending the debug output.
>
> I suspect the problem is with the NAS, as the debug shows that you
> are
> returning the following:
>
> Session-Timeout = 2160000
>
> You should have a look at the debug on the NAS to see what is
> happening.
> regards
>
> Hugh
>
>
> On Wed, 16 Jan 2002 15:04, Muhammad Mushtaque wrote:
> > Hi all,
> >
> > I m using Platypus with Radiator. I ve come across very strange
> > problem. There is a field of Blockminleft in Platypus in which we
> > insert prepaid time of our users ... when this time exceeds from
> 36000> minutes ... the user is not able to connect. Its very
> strange that the
> > user is easily got connected on 35000 mins ... Normally it seems
> to be
> > a radiator issue ... I m attching the detail file part of the users
> > which is not geeting connected with 36000 mins ... the user
> > authenticates but getting disconnect after authentication ... the
> > detail file part is as follows :
> >
> > *** Received from 202.63.217.245 port 1645 ....
> > Code: Access-Request
> > Identifier: 253
> > Authentic: <184><0>v<229><207><139>e<247><132><227>
> > c<146><168><212><16>
> > Attributes:
> > NAS-IP-Address = 202.63.217.245
> > NAS-Port = 109
> > Cisco-NAS-Port = "Async109"
> > NAS-Port-Type = Async
> > User-Name = "test_discount1"
> > Called-Station-Id = "7159"
> > Calling-Station-Id = "215219321"
> > User-Password
> > = "<136>$<245>N@<173><170>j<189><130><239>md5C<172>"
> > Service-Type = Framed-User
> > Framed-Protocol = PPP
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> > Handler 'Realm=DEFAULT'
> > Sat Jan 19 08:49:51 2002: DEBUG: Deleting session for
> test_discount1,> 202.63.217.245, 109
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: Query is: select DateAdd(Day,
> > ma.extension+ma.overdue, maExpireDate),
> > DateAdd(Day, sa.extension, saExpireDate), sa.AccountID,
> sa.AccountType,> sa.password, sa.login, sa.shell, sa.TimeLeft
> ,sa.LoginLimit> from masteraccounts ma, subaccounts sa
> > where (sa.login = 'test_discount1' or sa.shell = 'test_discount1')
> > and ma.customerid = sa.customerid
> > and sa.active <> 0 and ma.active <> 0
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Select results: 2003-01-16
> > 08:43:40.190, 2003-01-16 08:43:40.190, 6033, PPP, eworld,
> > test_discount1, , 36000, 1
> > Sat Jan 19 08:49:51 2002: DEBUG: Query is: select ra.RadAttributeID,
> > ra.RadVendorID, ra.RadVendorType,
> > Data, Value, Type, RadCheck
> > from RadConfigs rc, RadAttributes ra
> > where ra.RadAttributeID = rc.RadAttributeID
> > and ra.RadVendorID = rc.RadVendorID
> > and ra.RadVendorType = rc.RadVendorType
> > and rc.AccountID=6033
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Query is: select ra.RadAttributeID,
> > ra.RadVendorID, ra.RadVendorType,
> > Data, Value, Type, RadCheck
> > from RadATConfigs rc, RadAttributes ra
> > where ra.RadAttributeID = rc.RadAttributeID
> > and ra.RadVendorID = rc.RadVendorID
> > and ra.RadVendorType = rc.RadVendorType
> > and rc.AccountType='PPP'
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Query is: select
> > username,clicheck,cli1,cli2,cli3 from customer where username
> > = 'test_discount1'
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Radius::AuthEMERALD looks for match
> > with test_discount1
> > Sat Jan 19 08:49:51 2002: DEBUG: Expiration date converted to:
> > 1042657200
> > Sat Jan 19 08:49:51 2002: DEBUG: Expiration date converted to:
> > 1042657200
> > Sat Jan 19 08:49:51 2002: DEBUG: Radius::AuthEMERALD ACCEPT:
> > Sat Jan 19 08:49:51 2002: DEBUG: Access accepted for test_discount1
> > Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> > *** Sending to 202.63.217.245 port 1645 ....
> > Code: Access-Accept
> > Identifier: 253
> > Authentic: <184><0>v<229><207><139>e<247><132><227>
> > c<146><168><212><16>
> > Attributes:
> > Session-Timeout = 2160000
> > Service-Type = 2
> > Framed-Protocol = 1
> > Service-Type = Framed-User
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> > *** Received from 202.63.217.245 port 1646 ....
> > Code: Accounting-Request
> > Identifier: 254
> > Authentic:
> > <214>c<190><208><30>n<182><210><214><247><209><15><245><165>\+
> > Attributes:
> > NAS-IP-Address = 202.63.217.245
> > NAS-Port = 109
> > Cisco-NAS-Port = "Async109"
> > NAS-Port-Type = Async
> > User-Name = "test_discount1"
> > Called-Station-Id = "7159"
> > Calling-Station-Id = "215219321"
> > Acct-Status-Type = Start
> > Acct-Authentic = RADIUS
> > Service-Type = Framed-User
> > Acct-Session-Id = "0000004C"
> > Framed-Protocol = PPP
> > Acct-Delay-Time = 0
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> > Handler 'Realm=DEFAULT'
> > Sat Jan 19 08:49:51 2002: DEBUG: Adding session for test_discount1,
> > 202.63.217.245, 109
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling accounting with
> > Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: do query is: insert into Calls
> > (UserName, CallDate, AcctStatusType, AcctDelayTime,
> > AcctSessionId, NASIdentifier, CallerID, NASPort)
> > values
> > ('test_discount1', 'Jan 19, 2002 08:49', 1,
> > 0, '0000004C', '202.63.217.245', '215219321', 109)
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Accounting accepted
> > Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> > *** Sending to 202.63.217.245 port 1646 ....
> > Code: Accounting-Response
> > Identifier: 254
> > Authentic:
> > <214>c<190><208><30>n<182><210><214><247><209><15><245><165>\+
> > Attributes:
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> > *** Received from 202.63.217.245 port 1646 ....
> > Code: Accounting-Request
> > Identifier: 255
> > Authentic:
> > <132>&<178><250><27><198><203><190><5><200><180><207><172>w<231>V
> > Attributes:
> > NAS-IP-Address = 202.63.217.245
> > NAS-Port = 109
> > Cisco-NAS-Port = "Async109"
> > NAS-Port-Type = Async
> > User-Name = "test_discount1"
> > Called-Station-Id = "7159"
> > Calling-Station-Id = "215219321"
> > Acct-Status-Type = Stop
> > Acct-Authentic = RADIUS
> > Service-Type = Framed-User
> > Acct-Session-Id = "0000004C"
> > Framed-Protocol = PPP
> > Acct-Terminate-Cause = Host-Request
> > Acct-Input-Octets = 62
> > Acct-Output-Octets = 8
> > Acct-Input-Packets = 3
> > Acct-Output-Packets = 1
> > Acct-Session-Time = 0
> > Acct-Delay-Time = 0
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling request with
> > Handler 'Realm=DEFAULT'
> > Sat Jan 19 08:49:51 2002: DEBUG: Deleting session for
> test_discount1,> 202.63.217.245, 109
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling with Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: Handling accounting with
> > Radius::AuthEMERALD
> > Sat Jan 19 08:49:51 2002: DEBUG: do query is: insert into Calls
> > (UserName, CallDate, AcctStatusType, AcctDelayTime,
> > AcctInputOctets, AcctOutputOctets, AcctSessionId, AcctSessionTime,
> > AcctTerminateCause, NASIdentifier, CallerID, NASPort)
> > values
> > ('test_discount1', 'Jan 19, 2002 08:49', 2, 0, 62,
> > 8, '0000004C', 0, 18, '202.63.217.245', '215219321', 109)
> >
> > Sat Jan 19 08:49:51 2002: DEBUG: Accounting accepted
> > Sat Jan 19 08:49:51 2002: DEBUG: Packet dump:
> > *** Sending to 202.63.217.245 port 1646 ....
> > Code: Accounting-Response
> > Identifier: 255
> > Authentic:
> > <132>&<178><250><27><198><203><190><5><200><180><207><172>w<231>V
> > Attributes:
> >
> > Any one can help me out here ??
> >
> > thanks in Advance ...
> >
> > Best regards,
> >
> > Muhammad Mushtaque
> > Network Operations
> > eWorld(Pvt)Ltd.
> > 506, Progressive Plaza,
> > Beaumont Road Civil Lines,
> > Karachi.
> > UAN:92-21-111246246
> >
> > ________
> > This email and any files transmitted with it are confidential
> and are
> > intended solely for the use of the individual or entity to which
> they> are addressed. This communication represents the
> originator's personal
> > views and opinions, which do not necessarily reflect those of eWorld
> > (Pvt) Ltd. If you are not the original / intended recipient or the
> > person responsible for delivering the email to the intended
> recipient,> be advised that you have received this email in error,
> and that any
> > use, dissemination, forwarding, printing, or copying of this
> email is
> > strictly prohibited. If you have received this email in error, we
> > regret the inconvenience and request you to please immediately
> notify> at info at eworld.net.pk
> >
> > ===
> > Archive at http://www.open.com.a
> > Announcements on radiator-announce at open.com.au
> > To unsubscribe, email 'majordomo at open.com.au' with
> > 'unsubscribe radiator' in the body of the message.
>
> --
> Radiator: the most portable, flexible and configurable RADIUS server
> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
> -
> Nets: internetwork inventory and management - graphical, extensible,
> flexible with hardware, software, platform and database independence.
>
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list