(RADIATOR) Accounting information not sent?
Hugh Irvine
hugh at open.com.au
Tue Jan 22 17:54:42 CST 2002
Hello Jayanne -
This is a Cisco configuration issue. You should have a look at a debug on the
Cisco to verify that the IP address is indeed received in the Access-Accept,
and if it is then you will have to check the Cisco configuration.
This topic has been discussed many times on the Radiator list.
regards
Hugh
On Wed, 23 Jan 2002 04:58, Wakefield, Jayanne M. wrote:
> I have been unable for Radiator to pass a static ip address to the
> dialin client through a Cisco router. I've looked at cisco.com and in
> the Radiator archives to find out why this might be. I've included a
> trace from the connection. It appears that the IP address information
> is there during the access-response, but not in the
> accounting-response. Any assistance would be appreciated.
> Thank you,
> Jayanne
>
>
> $ Tue Jan 22 09:51:16 2002: DEBUG: Packet dump:
> *** Received from 10.254.0.183 port 1645 ....
> Code: Access-Request
> Identifier: 28
> Authentic: l<128>v?~<134><221>d=<193><189>V<236><169>X+
> Attributes:
> NAS-IP-Address = 10.254.0.183
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "dialuptest2"
> User-Password =
> "<142>tZ<0><169><224><241><31><174>?<10><127><180><1>,e"
> Service-Type = Framed-User
> Framed-Protocol = PPP
>
> Tue Jan 22 09:51:16 2002: DEBUG: Handling request with Handler
> 'Realm=DEFAULT'
> Tue Jan 22 09:51:16 2002: DEBUG: Deleting session for dialuptest2,
> 10.254.0.180
> Tue Jan 22 09:51:16 2002: DEBUG: Handling with Radius::AuthLDAP2
> Tue Jan 22 09:51:16 2002: DEBUG: Connecting to localhost, port 389
> Tue Jan 22 09:51:16 2002: DEBUG: Attempting to bind with cn = Directory
> Manager3
> Tue Jan 22 09:51:16 2002: DEBUG: LDAP got result for
> uid=dialuptest2,ou=People,m
> Tue Jan 22 09:51:16 2002: DEBUG: LDAP got userpassword:
> {SHA}8+RNA8/j+kvOru0mPe=
> Tue Jan 22 09:51:16 2002: DEBUG: LDAP got carLicense: 10.254.0.185
> Tue Jan 22 09:51:16 2002: DEBUG: Radius::AuthLDAP2 looks for match with
> dialupt2
> Tue Jan 22 09:51:16 2002: DEBUG: Radius::AuthLDAP2 ACCEPT:
> Tue Jan 22 09:51:16 2002: DEBUG: Access accepted for dialuptest2
> Tue Jan 22 09:51:16 2002: DEBUG: Packet dump:
> *** Sending to 10.254.0.183 port 1645 ....
> Code: Access-Accept
> Identifier: 28
> Authentic: l<128>v?~<134><221>d=<193><189>V<236><169>X+
> Attributes:
> Service-Type = Framed-User
> Framed-Protocol = PPP
> Framed-IP-Address = 10.254.0.185
> Framed-IP-Netmask = 255.255.0.0
> Framed-Routing = None
> Framed-MTU = 1500
> Framed-Compression = Van-Jacobson-TCP-IP
>
> Tue Jan 22 09:51:16 2002: DEBUG: Packet dump:
> *** Received from 10.254.0.183 port 1646 ....
> Code: Accounting-Request
> Identifier: 29
> Authentic: y;<152>E<239>V<180><<168><134><219>FE<236>O<10>
> Attributes:
> NAS-IP-Address = 10.254.0.183
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "dialuptest2"
> Acct-Status-Type = Start
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> Acct-Session-Id = "0000000A"
> Framed-Protocol = PPP
> Acct-Delay-Time = 0
>
> Tue Jan 22 09:51:16 2002: DEBUG: Handling request with Handler
> 'Realm=DEFAULT'
> Tue Jan 22 09:51:16 2002: DEBUG: Adding session for dialuptest2,
> 10.254.0.183,0
> Tue Jan 22 09:51:16 2002: DEBUG: Handling with Radius::AuthLDAP2
> Tue Jan 22 09:51:16 2002: DEBUG: Accounting accepted
> Tue Jan 22 09:51:16 2002: DEBUG: Packet dump:
> *** Sending to 10.254.0.183 port 1646 ....
> Code: Accounting-Response
> Identifier: 29
> Authentic: y;<152>E<239>V<180><<168><134><219>FE<236>O<10>
> Attributes:
>
> Tue Jan 22 09:51:21 2002: DEBUG: Packet dump:
> *** Received from 10.254.0.183 port 1646 ....
> Code: Accounting-Request
> Identifier: 30
> Authentic: <247><27><132><206><196><162>6<255>UIYk7f<250>P
> Attributes:
> NAS-IP-Address = 10.254.0.183
> NAS-Port = 40
> NAS-Port-Type = Async
> User-Name = "dialuptest2"
> Acct-Status-Type = Stop
> Acct-Authentic = RADIUS
> Service-Type = Framed-User
> Acct-Session-Id = "0000000A"
> Framed-Protocol = PPP
> Acct-Terminate-Cause = Lost-Carrier
> Acct-Input-Octets = 300
> Acct-Output-Octets = 320
> Acct-Input-Packets = 5
> Acct-Output-Packets = 6
> Acct-Session-Time = 5
> Acct-Delay-Time = 0
>
> Tue Jan 22 09:51:21 2002: DEBUG: Handling request with Handler
> 'Realm=DEFAULT'
> Tue Jan 22 09:51:21 2002: DEBUG: Deleting session for dialuptest2,
> 10.254.0.180
> Tue Jan 22 09:51:21 2002: DEBUG: Handling with Radius::AuthLDAP2
> Tue Jan 22 09:51:21 2002: DEBUG: Accounting accepted
> Tue Jan 22 09:51:21 2002: DEBUG: Packet dump:
> *** Sending to 10.254.0.183 port 1646 ....
> Code: Accounting-Response
> Identifier: 30
> Authentic: <247><27><132><206><196><162>6<255>UIYk7f<250>P
> Attributes:
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
--
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X.
-
Nets: internetwork inventory and management - graphical, extensible,
flexible with hardware, software, platform and database independence.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list