(RADIATOR) FW: Radiator evalaution
Tony B
tonyb at go-concepts.com
Mon Feb 11 13:35:44 CST 2002
You must make the Digest-MD5-2.16 before you make Radiator
So in any directory do:
tar -zxvf Digest-MD5-2.16.tar.gz
cd Digest-MD5-2.16
perl Makefile.PL
make
make test
make install
Then make, make test Radiator
Thanks,
Tony B, CCNA, Network+
Systems Administration
GO Concepts, Inc. / www.go-concepts.com
Are you on the GO yet?
What about those you know, are they on the GO?
513.934.2800
1.888.ON.GO.YET
-----Original Message-----
From: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au] On
Behalf Of Murat Kirmaci
Sent: Monday, February 11, 2002 1:09 PM
To: radiator at open.com.au
Subject: FW: (RADIATOR) FW: Radiator evalaution
Hello again,
First of all thanks to Rolando for helpful information, I tried to
unarchieve TAR format as you mentioned like
tar -zxvf Radiator-2.19.tgz -C /usr/local
then
I
cd /usr/local/Radiator-Demo-2.19/
In the same directory, I unarchieve the downloaded
Digest-MD5-2.16.tar.gz
via
tar -zxvf Digest-MD5-2.16.tar.gz
then copied the unarchieved MD5 files into the Radiator-Demo-2.19
directory
------------------------------------------------------------------------
----
-----
/usr/local/Radiator-2.19/perl Makefile.PL
.........for U32 no restrictions
.........for U32 no restrictions
Writing makefile for Digest :: MD5
Writing makefile for Digest :: MD5
--------------------------------------------------------------------
After that I run make test command
------------------------------------------------------------------------
----
----
/usr/local/Radiator-Demo-2.19/make test
...
...
...
ok1a
Can't locate Digest/MD5.pm in @INC (......) at Radius/Radius.pm line 20
/ 23
Begin failed -Compilation aborted at Radius/Radius.pm line 23
not ok 7b
...
not ok 7c
------------------------------------------------------------------------
----
-------
After make test command I got the above result , There is something
wrong
but I cannot guess what is the problem,
I'll be pleased to get your help.
Regards.
Murat KIRMACI
-----Original Message-----
From: Rolando Riley [mailto:rriley at ayayai.com]
Sent: Thursday, February 07, 2002 6:33 PM
To: radiator at open.com.au
Subject: RE: (RADIATOR) FW: Radiator evalaution
Hi Murat:
You should be able to get it from the same source you got the
rpm.
Anyways
I found a page that could help you install the "rpm tool" to succesfully
install your rpm copy of radiator in Slackware.
http://www.linuxdoc.org/HOWTO/mini/RPM+Slackware.html
After you finish the install of rpm all you have to do is :
rpm -i <packagename.rpm>
to install any rpm package
You must be sure you have all the dependecies Radiator needs to
works well.
Please go to /<radius-path>/doc/install.html
It is not slackware problem. When you acces the evaluation copy there
should be two choices.
Tar format
RPM format
If you go and download the TAR format you just have to do something
like:
tar -zxvf Radiator-2.19.tgz -C /usr/local
Hope this helps,
-----------------------------------------------
Ing. Rolando Riley
Administrador de Sistemas Unix
(Unix System Administrator)
AYAYAI.COM S.A.
Tel: (507) 265-2424 ext. 408
-----------------------------------------------
-----Mensaje original-----
De: Murat Kirmaci [mailto:kirmacim at turcom.com.tr]
Enviado el: Thursday, February 07, 2002 10:56 AM
Para: Rolando Riley; radiator at open.com.au
Asunto: RE: (RADIATOR) FW: Radiator evalaution
How will I get the source file of the radiator? Is it the problem of the
Slackware and will any other type linux like Red Hat or Suse, be a
solution
for this problem?
Regards.
Murat KIRMACI
-----Original Message-----
From: Rolando Riley [mailto:rriley at ayayai.com]
Sent: Thursday, February 07, 2002 3:54 PM
To: radiator at open.com.au
Subject: RE: (RADIATOR) FW: Radiator evalaution
"I" would suggest that for Slackware you use the source file of radiator
from its home site. BTW ... rpm are "binaries" trying to make it be
.tar.gz
file would not transform "binaries" package into "source" package.
best regards,
R. Riley
-----Mensaje original-----
De: owner-radiator at open.com.au [mailto:owner-radiator at open.com.au]En
nombre de Murat Kirmaci
Enviado el: Thursday, February 07, 2002 7:23 AM
Para: radiator at open.com.au
Asunto: (RADIATOR) FW: Radiator evalaution
Hello,
As an operating system Linux Slackware 8.0 is installed and I have
achieved
to unarchieve the .tar extension via
tar -xvf file name
Currently I can not able to start Radiator server
although I have written as you mentioned at your web site
/radiator/etc/init.d/radiator start
but it gave that could not find the file name or directory.
I'll be pleased to get your help and suggestions.
Regards.
Murat KIRMACI
-----Original Message-----
From: Murat Kirmaci
Sent: Monday, February 04, 2002 2:45 PM
To: 'Mike McCauley'
Cc: Proje Kontrol
Subject: RE: Radiator evalaution
Hello Mike,
I have downloaded the Radiator-Demo-2.19 RPM Format for Red Hat 7 but
currently I have got Slackware 8.0 installed in the PC .
I changed the rpm format to tar.gz format extension by the command (
Cause
of not able to run rpm command as you mentioned in your web browser.)
> rpm2targz Radiator-Demo-2.19-2.noarch.rpm
then I have seen that the file's extension changed to .tar.gz
> ls -p
>Radiator-Demo-2.19-2.noarch.tar.gz
then
> gzip -d Radiator-Demo-2.19-2.noarch.tar.gz
changed to
> ls -p
> Radiator-Demo-2.19-2.noarch.tar
I tried to decompress this .tar extension with the
>tar -x file name
but could not get the extracted files into a directory.
What might be the problem? Should I certainly need Red Hat 7?
Regards.
Murat KIRMACI
-----Original Message-----
From: Mike McCauley [mailto:mikem at open.com.au]
Sent: Thursday, January 31, 2002 12:36 AM
To: kirmacim at turcom.com.tr
Cc: joanne at open.com.au
Subject: Radiator evalaution
Hello Murat,
By now, you should have received your user name and password,
allowing you to download your evaluation copy of Radiator.
To download and install Radiator, please follow the instructions at
http://www.open.com.au/radiator/install-demo.html and let us know how
you
get on. Don't forget to subscribe to the Radiator mailing list for
news and updates.
We hope your evaluation is successful, and we look forward to your
eventual order. We will be in touch before the end of your evaluation
period.
Cheers
--
Mike McCauley mikem at open.com.au
Open System Consultants Pty. Ltd Unix, Perl, Motif, C++, WWW
24 Bateman St Hampton, VIC 3188 Australia http://www.open.com.au
Phone +61 3 9598-0985 Fax +61 3 9598-0955
Radiator: the most portable, flexible and configurable RADIUS server
anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
Platypus, Freeside, TACACS+, PAM, external, Active Directory etc etc
on Unix, Win95/8, 2000, NT, MacOS 9, MacOS X
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list