(RADIATOR) Radiator on Windows 2000
Jamz at AirNet.Com.AU
Jamz at AirNet.Com.AU
Tue Sep 4 19:10:28 CDT 2001
'Tunde,
All the information you need is in the reference manual - just start
at 16.4 and read all the sections that mention "SRVANY".
One thing that caught me out was that the service would not run unless the
registry key for the working directory was set, so even though it says its
optional remember to set all registry keys.
Cheers,
Jamz.
> -----Original Message-----
> From: 'Tunde Ogedengbe [mailto:tunde at linkserve.net]
> Sent: Tuesday, 4 September 2001 6:34 PM
> To: Hugh Irvine
> Cc: radiator at open.com.au
> Subject: (RADIATOR) Radiator on Windows 2000
> Importance: Low
>
> We are planning to move our Radiator Radius from Linux to Windows 2000. I
> need instruction on how to make Radiusd run as a service automatically.
>
> 'Tunde Ogedengbe
> Linkserve Limited
> 22 Akin Adesola Street
> Victoria Island
> Lagos - Nigeria
> Tel: +234 1 2623900
> Fax: +234 1 2623906
> URL: http://www.linkserve.net
> ----- Original Message -----
> From: "Hugh Irvine" <hugh at open.com.au>
> To: "'Tunde Ogedengbe" <tunde at linkserve.net>
> Sent: Tuesday, September 04, 2001 12:15 PM
> Subject: Re: Re: (RADIATOR) SimultaneousUse
>
>
> >
> > Hello 'Tunde -
> >
> > There are two different files - one for debug messages (known as the
> > log file), and the other for accounting information (known as the
> > detail file). I need to see a copy of a trace 4 debug file as written
> > to the log file (not an accounting detail file).
> >
> > thanks
> >
> > Hugh
> >
> >
> >
> > At 9:57 +0200 01/9/4, 'Tunde Ogedengbe wrote:
> > >Hugh:
> > >
> > >I dont understand. It was the accounting output (detail) that I sent
to
> you
> > >under trace 4 debug. Do you require a different trace level?
> > >
> > >'Tunde Ogedengbe
> > >Linkserve Limited
> > >22 Akin Adesola Street
> > >Victoria Island
> > >Lagos - Nigeria
> > >Tel: +234 1 2623900
> > >Fax: +234 1 2623906
> > >URL: http://www.linkserve.net
> > >----- Original Message -----
> > >From: "Hugh Irvine" <hugh at open.com.au>
> > >To: "'Tunde Ogedengbe" <tunde at linkserve.net>
> > >Sent: Monday, September 03, 2001 12:41 AM
> > >Subject: Re: Re: (RADIATOR) SimultaneousUse
> > >
> > >
> > >>
> > >> Hello 'Tunde -
> > >>
> > >> Thanks for sending this, however it is the accounting output from
the
> > >> detail file, not a trace 4 debug. Could you please send me the trace
> > >> 4 debug showing what is happening?
> > >>
> > >> thanks
> > >>
> > >> Hugh
> > >>
> > >>
> > >>
> > >> >Pls find below the sample details records for our connection:
> > >> >
> > >> >Sat Sep 1 15:15:08 2001
> > >> >User-Name = "xxxxx"
> > >> >NAS-IP-Address = x.x.x.x
> > >> >Acct-Status-Type = Stop
> > >> >Acct-Session-Id = "50332430"
> > >> >Acct-Delay-Time = 0
> > >> >Acct-Authentic = RADIUS
> > >> >Service-Type = Framed-User
> > >> >NAS-Port-Type = Async
> > >> >NAS-Port = 769
> > >> >USR-Modem-Training-Time = 16
> > >> >USR-Interface-Index = 2025
> > >> >USR-Chassis-Call-Slot = 4
> > >> >USR-Chassis-Call-Span = 16
> > >> >USR-Chassis-Call-Channel = 1
> > >> >USR-Unauthenticated-Time = 7
> > >> >Calling-Station-Id = ""
> > >> >Called-Station-Id = ""
> > >> >USR-Modulation-Type = v34
> > >> >USR-Simplified-MNP-Levels = NONE
> > >> >USR-Simplified-V42bis-Usage = NONE
> > >> >USR-Connect-Speed = 28800_BPS
> > >> >Framed-Protocol = PPP
> > >> >Framed-IP-Address = x.x.x.x
> > >> >Acct-Session-Time = 93
> > >> >Acct-Terminate-Cause = User-Request
> > >> >Acct-Input-Octets = 4685
> > >> >Acct-Output-Octets = 1756
> > >> >Acct-Input-Packets = 104
> > >> >Acct-Output-Packets = 69
> > >> >Timestamp = 999353708
> > >> >
> > >> >Sat Sep 1 15:15:09 2001
> > >> >Acct-Session-Id = "3100131A"
> > >> >User-Name = "xxxxx"
> > >> >NAS-IP-Address = x.x.x.x
> > >> >NAS-Port = 10
> > >> >Acct-Status-Type = Start
> > >> >Acct-Authentic = RADIUS
> > >> >Service-Type = Framed-User
> > >> >Framed-Protocol = PPP
> > >> >Framed-IP-Address = x.x.x.x
> > >> >Acct-Delay-Time = 0
> > >> >Timestamp = 999353709
> > >> >
> > >> >Sat Sep 1 15:15:09 2001
> > >> >User-Name = "xxxx"
> > >> >NAS-IP-Address = x.x.x.x
> > >> >Acct-Status-Type = Start
> > >> >Acct-Session-Id = "328015"
> > >> >Acct-Delay-Time = 0
> > >> >Acct-Authentic = RADIUS
> > >> >Service-Type = Framed-User
> > >> >NAS-Port-Type = Async
> > >> >NAS-Port = 6
> > >> >USR-Modem-Training-Time = 11
> > >> >USR-Interface-Index = 1262
> > >> >USR-Chassis-Call-Slot = 1
> > >> >USR-Chassis-Call-Span = 1
> > >> >USR-Chassis-Call-Channel = 6
> > >> >USR-Unauthenticated-Time = 4
> > >> >Calling-Station-Id = ""
> > >> >Called-Station-Id = ""
> > >> >USR-Modulation-Type = v34
> > >> >USR-Simplified-MNP-Levels = ccittV42SREJ
> > >> >USR-Simplified-V42bis-Usage = ccittV42bis
> > >> >USR-Connect-Speed = 19200_BPS
> > >> >Framed-Protocol = PPP
> > >> >Framed-IP-Address = x.x.x.x
> > >> >Timestamp = 999353709
> > >> >
> > >> >Sat Sep 1 15:15:10 2001
> > >> >User-Name = "xxx"
> > >> >NAS-IP-Address = x.x.x.x
> > >> >Acct-Status-Type = Start
> > >> >Acct-Session-Id = "1638681"
> > >> >Acct-Delay-Time = 0
> > >> >Acct-Authentic = RADIUS
> > >> >Service-Type = Framed-User
> > >> >NAS-Port-Type = Async
> > >> >NAS-Port = 26
> > >> >USR-Modem-Training-Time = 22
> > >> >USR-Interface-Index = 1282
> > >> >USR-Chassis-Call-Slot = 1
> > >> >USR-Chassis-Call-Span = 1
> > >> >USR-Chassis-Call-Channel = 26
> > >> >USR-Unauthenticated-Time = 6
> > >> >Calling-Station-Id = ""
> > >> >Called-Station-Id = ""
> > >> >USR-Modulation-Type = v90Digital
> > >> >USR-Simplified-MNP-Levels = ccittV42
> > >> >USR-Simplified-V42bis-Usage = ccittV42bis
> > >> >USR-Connect-Speed = 45333_BPS
> > >> >Framed-Protocol = PPP
> > >> >Framed-IP-Address = x.x.x.x
> > >> >Timestamp = 999353710
> > >> >
> > >> >>
> > >> >> Hello 'Tunde -
> > >> >>
> > >> >> Thanks for the configuration file, however I will also need to
see
> a
> > >trace
> > >> >4
> > >> >> debug from Radiator showing the problem.
> > > > >>
> > >> >> thanks
> > >> >>
> > >> >> Hugh
> > >> >>
> > >> >>
> > >> >> On Friday 31 August 2001 02:22, 'Tunde Ogedengbe wrote:
> > >> >> > Hugh:
> > >> >> >
> > >> >> > See conf below:
> > >> >> >
> > >> >> > (radius.cfg)
> > >> >> >
> > >> >> > Foreground
> > >> >> >
> > >> >> > LogStdout
> > >> >> >
> > >> >> > Trace 3
> > >> >> >
> > >> >> > PidFile /usr/local/etc/raddb/radiusd.pid
> > >> >> >
> > >> >> > AuthPort 1645
> > >> >> >
> > >> >> > AcctPort 1646
> > >> >> >
> > >> >> > LogDir /usr/local/etc/raddb
> > >> >> >
> > >> >> > DbDir /usr/local/etc/raddb
> > >> >> >
> > >> >> > LogFile %L/logfile.%Y.%m.%d
> > >> >> >
> > >> >> > DictionaryFile %D/dictionary
> > >> >> >
> > >> >> > SnmpgetProg /usr/bin/snmpget
> > >> >> >
> > >> >> > <Client X.X.X.X>
> > >> >> > Secret ****
> > >> >> > IgnoreAcctSignature
> > >> >> > </Client>
> > >> >> >
> > >> >> >
> > >> >> > <Realm DEFAULT>
> > >> >> > AcctLogFileName %L/detail.%Y.%m.%d
> > >> >> >
> > >> >> > RejectHasReason
> > >> >> >
> > >> >> > <AuthBy FILE>
> > >> >> > Identifier Check-FILE
> > >> >> > Filename %D/users
> > >> >> > DefaultSimultaneousUse 1
> > >> >> > </AuthBy>
> > >> >> >
> > >> >> > <AuthBy UNIX>
> > >> >> > Identifier Check-UNIX
> > >> >> > Filename /etc/shadow
> > >> >> > DefaultSimultaneousUse 1
> > >> >> > </AuthBy>
> > >> >> >
> > >> >> > </Realm>
> > >> >> >
> > >> >> >
> > >> >> > 'Tunde Ogedengbe
> > >> >> >
> > >> >> >
> > >> >> >
> > >> >> > -------- ORIGINAL MESSAGE BELOW --------
> > >> >> >
> > >> >> > Hello Camilo, Hello 'Tunde -
> > >> >> >
> > >> >> > In general, problems with simultaneous use are usually due to
> > >dropped
> > >> > > > accounting packets (sometimes congested links, sometimes NAS
> bugs,
> > >> >> > sometimes
> > >> >> > configuration problems with Radiator).
> > >> >> >
> > >> >> > I am happy to assist with any problems, but I need to see what
> is
> > >> >> > going on.
> > >> >> >
> > >> >> > Please send me a copy of the configuration file (no secrets)
> > >together
> > >> >> > with a
> > >> >> > trace 4 debug from Radiator showing the problem.
> > >> >> >
> > >> >> > It would also be helpful if you could provide some description
> of
> > >> >> > what you
> > >> >> > are trying to accomplish.
> > >> >> >
> > >> >> > thanks
> > >> >> >
> > >> >> > Hugh
> > >> >> >
> > >> >> > On Thursday 30 August 2001 01:04, Camilo Fernando Corena G.
> wrote:
> > >> >> > > I have the same problem.
> > >> >> > >
> > >> >> > > Someone can help us???
> > >> >> > >
> > >> >> > > 'Tunde Ogedengbe wrote:
> > >> >> > > > Hello:
> > >> >> > > >
> > >> >> > > > We are having problems with this attribute. In some of
our
> > >> >> > > > installations, the attribute does not work at all and so
no
> > >> >restriction
> > >> >> > > > is enforced. On another installation, it works but with
> severe
> > >> >> > > > problems. For instance customers with an attribute of 1
who
> > >> >previously
> > >> >> > > > connected to our system and later disconnected are having
> > >problems
> > >> >> > > > reconnecting. This has resulted in a serious problem in
> which a
> > >> >> > > > significant percentage of connection problems were related
> to
> > >the
> > >> >> > > > SimultaneousUse attribute. What we have done in the
interim
> is
> > >to
> > >> >set
> > >> >> > > > the attribute to 3. How can we resolve this problem?
> > >> >> > > >
> > >> >> > > > 'Tunde Ogedengbe
> > >> >> > > > Linkserve Limited
> > >> >> > > > 22 Akin Adesola Street
> > >> >> > > > Victoria Island
> > >> >> > > > Lagos - Nigeria
> > >> >> > > > Tel: +234 1 2623900
> > >> >> > > > Fax: +234 1 2623906
> > >> >> > > > URL: http://www.linkserve.net
> > >> >> > > > ----- Original Message -----
> > >> >> > > > From: "Hugh Irvine" <hugh at open.com.au>
> > >> >> > > > To: "lloyd" <dagocl at team.ph.inter.net>;
> <radiator at open.com.au>
> > >> >> > > > Cc: <hugh at open.com.au>
> > >> >> > > > Sent: Wednesday, August 29, 2001 8:48 AM
> > >> >> > > > Subject: (RADIATOR) Re: two authby clauses
> > >> >> > > >
> > >> >> > > > > Hello Lloyd -
> > >> >> > > > >
> > >> >> > > > > What exactly are you trying to do?
> > >> >> > > > >
> > >> >> > > > > thanks
> > >> >> > > > >
> > >> >> > > > > Hugh
> > >> >> > > > >
> > >> >> > > > > On Wednesday 29 August 2001 14:28, lloyd wrote:
> > >> >> > > > > > hi,
> > >> >> > > > > > how do i configure radiator in such a way that before
it
> > >proxy's
> > >> >to
> > >> >> > > > > > another radius server, it checks for the
> Called-Station-Id
> > >in
> > >> >say a
> > >> >> > > > > > flat file or a database?
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > > > will this work (file based with only one field:
> > > > >> > > > > > telephonenumbers).....
> > >> >> > > > > >
> > >> >> > > > > > <AuthBy FILE>
> > >> >> > > > > > Identifier calledstationid
> > >> >> > > > > > FileName %d/Called-Station-ID
> > >> >> > > > > > </AuthBy>
> > >> >> > > > > >
> > >> >> > > > > > <AuthBy RADIUS>
> > >> >> > > > > > Identifier radiusproxy>
> > >> >> > > > > > Host ***.***.***.***
> > >> >> > > > > > Secret ******
> > >> >> > > > > > AuthPort ****
> > >> >> > > > > > AcctPort ****
> > >> >> > > > > > </AuthBy>
> > >> >> > > > > >
> > >> >> > > > > > <Realm>
> > >> >> > > > > > AuthByPolicy ContinueAlways
> > >> >> > > > > > AuthBy calledstationid
> > >> >> > > > > > AuthBy radiusproxy
> > >> >> > > > > > </Realm>
> > >> >> > > > > >
> > >> >> > > > > >
> > >> >> > > > > > Lloyd Dagoc
> > >> >> > > > > > InterDotNet Philippines Inc.
> > >> >> > > > >
> > >> >> > > > > --
> > >> >> > > > > Radiator: the most portable, flexible and configurable
> RADIUS
> > >> >server
> > >> >> > > > > anywhere. Available on *NIX, *BSD, Windows 95/98/2000,
NT,
> > >MacOS
> > >> >X.
> > >> >> > > > > -
> > >> >> > > > > Nets: internetwork inventory and management - graphical,
> > >> >extensible,
> > >> >> > > > > flexible with hardware, software, platform and database
> > >> >independence.
> > >> >> > > > > ===
> > >> >> > > > > Archive at http://www.open.com.au/archives/radiator/
> > >> >> > > > > Announcements on radiator-announce at open.com.au
> > >> >> > > > > To unsubscribe, email 'majordomo at open.com.au' with
> > >> >> > > > > 'unsubscribe radiator' in the body of the message.
> > >> >> > > >
> > >> >> > > > ===
> > >> >> > > > Archive at http://www.open.com.au/archives/radiator/
> > >> >> > > > Announcements on radiator-announce at open.com.au
> > >> >> > > > To unsubscribe, email 'majordomo at open.com.au' with
> > >> >> > > > 'unsubscribe radiator' in the body of the message.
> > >> >>
> > >> >> --
> > >> >> Radiator: the most portable, flexible and configurable RADIUS
> server
> > >> >> anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS
> X.
> > >> >> -
> > >> >> Nets: internetwork inventory and management - graphical,
> extensible,
> > >> > > flexible with hardware, software, platform and database
> independence.
> > >> >> ===
> > >> >> Archive at http://www.open.com.au/archives/radiator/
> > >> >> Announcements on radiator-announce at open.com.au
> > >> >> To unsubscribe, email 'majordomo at open.com.au' with
> > >> >> 'unsubscribe radiator' in the body of the message.
> > >> >>
> > >>
> > >> --
> > >>
> > >> NB: I am travelling this week, so there may be delays in our
> > >correspondence.
> > >>
> > >> Radiator: the most portable, flexible and configurable RADIUS server
> > >> anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> > >> Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
> > >> Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
> > >>
> >
> > --
> >
> > NB: I am travelling this week, so there may be delays in our
> correspondence.
> >
> > Radiator: the most portable, flexible and configurable RADIUS server
> > anywhere. SQL, proxy, DBM, files, LDAP, NIS+, password, NT, Emerald,
> > Platypus, Freeside, Interbiller, TACACS+, PAM, external, etc, etc.
> > Available on Unix, Linux, FreeBSD, Windows 95/98/2000, NT, MacOS X.
> >
>
> ===
> Archive at http://www.open.com.au/archives/radiator/
> Announcements on radiator-announce at open.com.au
> To unsubscribe, email 'majordomo at open.com.au' with
> 'unsubscribe radiator' in the body of the message.
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.
More information about the radiator
mailing list