(RADIATOR) how to save cisco-avpair= nas-rx-speed

[david.kramar at aliatel.cz]

Hi, I didn't find correct answer in list..
please,  I would like to save to AcctLogFileName "cisco-avpair =
"nas-rx-speed=28800"" - the number "28800" but I don know what I have to
write to conf. file,

Thanks for any answer
David 
.
.
<Realm DEFAULT>
        <AuthBy RADIUS>
            Secret xxxxxxx
            <Host 172.26.1.11>
                AuthPort 1812
                AcctPort 1813
            </Host>
            <Host 172.26.2.12>
                AuthPort 1812
                AcctPort 1813
            </Host>
        </AuthBy>
   AcctLogFileName %L/default%Y-%v-%d
   AcctLogFileFormat    %{User-Name} %o %{Timestamp} %{Acct-Status-Type}
%{Acct-Delay-Time} \
                        %{Acct-Input-Octets} %{Acct-Output-Octets}
%{Acct-Session-Id} \
                        %{Acct-Session-Time} %{Acct-Terminate-Cause}
%{NAS-IP-Address} \
                        %{NAS-Port} %{Framed-IP-Address}  "what I have to
write here for save "cisco-avpair nas-rx-speed???"
</Realm>

#--------trace 4 ------------DEBUG-----------------
Code:       Accounting-Request
Identifier: 2
Authentic:  <0><0><0><0><0><0><0><0><0><0><0><0><0><0><0><0>
Attributes:
        NAS-IP-Address = 172.26.2.155
        NAS-Port = 5
        Cisco-NAS-Port = "Async5*Serial0:8"
        NAS-Port-Type = Async
        User-Name = "user1 at userdomain"
        Called-Station-Id = "713"
        Acct-Status-Type = Stop
        Acct-Authentic = RADIUS
        Service-Type = Framed-User
        Acct-Session-Id = "00000044"
        Framed-Protocol = PPP
        Framed-IP-Address = 172.26.3.2
        Acct-Terminate-Cause = User-Request
        Acct-Input-Octets = 2219
        Acct-Output-Octets = 102
        Acct-Input-Packets = 29
        Acct-Output-Packets = 6
        Acct-Session-Time = 15
        cisco-avpair = "disc-cause-ext=1045"
        cisco-avpair = "pre-bytes-in=105"
        cisco-avpair = "pre-bytes-out=72"
        cisco-avpair = "pre-paks-in=4"
        cisco-avpair = "pre-paks-out=4"
        cisco-avpair = "pre-session-time=21"
        cisco-avpair = "connect-progress=60"
        cisco-avpair = "nas-rx-speed=28800"
        cisco-avpair = "nas-tx-speed=33600"
        Acct-Delay-Time = 0
        Timestamp = 1006282052
===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.