(RADIATOR) authenticator field

[Michael Chen]

Hi Hugh,

I use radiator as a proxy-radius server, with the 6400 as ppp
termination point. The secret key is used between the 6400 - proxyradius
and proxyradius - isp radius. In RFC2138 it describes that the secret
key is within the authenticator field. So I first assumed that the
authentic field between the 6400 -proxyradius and proxyradius -isp is
different. But this was unfortunatly not the case. Can anyond explain
why ?

Cheers,

Michael Chen
KPN Telecom
   

 

 

Tue Sep 18 11:42:09 2001: DEBUG: Packet dump:

*** Received from 213.162.172.134 port 1645 ....

Code: Access-Request

Identifier: 96

Authentic: }<143>&6"{<180><150><221>\<142><29><205><199>l<206>

Attributes:

NAS-IP-Address = 10.28.25.145

NAS-Port = 285212872

Cisco-NAS-Port = "Virtual-Access2"

NAS-Port-Type = Virtual

User-Name = "user3 at isp2"

CHAP-Password =
a<182>9<139><10><151><182><254><221><186>t<139><8><150><246><185>b

Service-Type = Framed-User

Framed-Protocol = PPP

Tue Sep 18 11:42:09 2001: DEBUG: Handling request with Handler
'Realm=isp2'

Tue Sep 18 11:42:09 2001: DEBUG: Deleting session for user3 at isp2,
10.28.25.145, 285212872

Tue Sep 18 11:42:09 2001: DEBUG: Handling with Radius::AuthRADIUS

Tue Sep 18 11:42:09 2001: DEBUG: Packet dump:

 

*** Sending to 10.17.30.100 port 1812 ....

Code: Access-Request

Identifier: 194

Authentic: }<143>&6"{<180><150><221>\<142><29><205><199>l<206>

Attributes:

NAS-IP-Address = 10.28.25.145

NAS-Port = 285212872

Cisco-NAS-Port = "Virtual-Access2"

NAS-Port-Type = Virtual

User-Name = "user3 at isp2"

CHAP-Password =
a<182>9<139><10><151><182><254><221><186>t<139><8><150><246><185>b

Service-Type = Framed-User

Framed-Protocol = PPP

Tue Sep 18 11:42:09 2001: DEBUG: Packet dump:

 

*** Received from 10.17.30.100 port 1812 ....

Code: Access-Accept

Identifier: 194

Authentic: <176><151><216><205>h<215>n<165>5<133><243><242>{<200>\'

Attributes:

Framed-IP-Address = 10.17.32.33

Framed-Protocol = PPP

Service-Type = Framed-User

Framed-IP-Netmask = 255.255.255.240

Ascend-Client-Primary-DNS = 194.151.52.2

Ascend-Client-Secondary-DNS = 194.151.52.2

Tue Sep 18 11:42:09 2001: DEBUG: Received reply in AuthRADIUS for req
194 from 10.17.30.100:1812

Tue Sep 18 11:42:09 2001: DEBUG: Access accepted for user3 at isp2

Tue Sep 18 11:42:09 2001: DEBUG: Packet dump:

 

*** Sending to 213.162.172.134 port 1645 ....

Code: Access-Accept

Identifier: 96

Authentic: }<143>&6"{<180><150><221>\<142><29><205><199>l<206>

Attributes:

Framed-IP-Address = 10.17.32.33

Framed-IP-Netmask = 255.255.255.240

Service-Type = Framed-User

Framed-Protocol = PPP

cisco-avpair = "lcp:interface-config=ip vrf forwarding isp2-30\nip
unnumbered loopback30\n"

cisco-avpair = "ip:route=vrf isp2-30 10.17.32.32 255.255.255.240
10.17.32.33 5"

cisco-avpair = "ip:dns-servers=194.151.52.2 194.151.52.2"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.open.com.au/pipermail/radiator/attachments/20011204/c8cc70e6/attachment.html>