(RADIATOR)

[Ron Hensley]

Good Morning,

Ive been trying to bring up a second server to service a remote POP as a
local Radius Server.
Whenever Ive brought up the POP, which consists of 30 PRIs worth of lines
(690 lines)
things will work fine it seems, for a while, then all of the sudden we have
only 1 out of 10 at best
getting on. The rest show on our Bay Terminal servers as a call in progress,
still waiting for
a Radius Response of Yes or Not. That is, it shows a call but no username
yet.

On the radius log side we seem to get radius.log entries that users are
being Authenticated and Accepted
whom never make it on (Thus those no named entries on our Terminal Servers).

So it sounds as if the Term Servers are sending the Auth Requests, Radius
Server is getting it, and the Reply
is never getting there perhaps.

The Term Servers Are Bay Networks 5399s and the Radius Server is on a Sparc
running Solaris 2.7

Can you tell me the step by step way to Intelligently get to the bottom of
whats happening when this goes on?
Id Imagine a combination of Trace 4 logs, and an Ethernet Sniffer on both
sides to be assured traffic
is making it back and forth. But as you have more then likely run into this
before, Id like to hear thoughts
on getting to the root of it the fastest and 'Gotchas' to be looking out
for.

Thanks much

===
Archive at http://www.open.com.au/archives/radiator/
Announcements on radiator-announce at open.com.au
To unsubscribe, email 'majordomo at open.com.au' with
'unsubscribe radiator' in the body of the message.